US Crude Prices Fall More Than 4 Percent as Israel is Not Expected to Strike Iran's Oil Industry - 17 October, 2024 07:30 AM
IEA Doubles Down on Its Forecast of Peak Oil and Gas Demand by 2030 - 17 October, 2024 07:30 AM
Kamala Harris Pledged to Prosecute Oil Cos. over Emissions; Now She's Praising Record US Production - 17 October, 2024 07:30 AM
Senators Press Biden Administration to Speed Up Iran Oil Sanctions Enforcement - 17 October, 2024 07:30 AM
Colorado Regulators Passed Sweeping Rules to Mitigate Impacts of Oil and Gas Drilling - 17 October, 2024 07:30 AM
Although conventional reservoirs dominate the Bohai Basin, China, a new type of sandstone reservoir also exists in the Dongpu depression that has a low matrix porosity (tight) in which natural fractures govern both permeability and porosity. These fractured sandstones are located on a structurally modified buried hill underlying Paleogene mudstones, and are truncated along an angular unconformity. The fractured sandstone oils of the Triassic Liujiagou, Heshanggou, and Ermaying Formations are derived from the Paleogene Shahejie Formation, which reached peak oil generation and expulsion during the Oligocene to early Miocene (32.8–15.6 Ma). Gas was generated primarily during the Paleogene from Carboniferous and Permian coals. Petrographic evidence suggests that oil and gas emplacement followed the compaction and cementation of the Triassic sandstone reservoirs. Fluid inclusion evidence and burial history analysis suggest that fractures developed before oil emplacement but may have coincided with peak gas generation, which suggests that oil and gas mainly migrated and accumulated in fractures.
The AAPG Energy Minerals Division covers many scientific disciplines and interests – and because previous EXPLORER articles featured shale gas and oil shale, this quarter will focus on highlights from this year’s EMD November Mid-Year Meeting Commodity Reports.
Ready, set, drill. Oh, wait, not yet! Just when the United Kingdom’s ban on hydraulic fracturing was lifted, other obstacles arose, making key players have to wait their turn to tackle the country’s potentially inviting shale play.
It don’t come easy: The oil rich Monterey Shale has proved to be the biggest conventional resource provider in California, and it promises even more – but the formation’s complex geology is just as intimidating as its potential is huge.
Where’s the beef? Latin America’s new Vaca Muerta play has loads of potential – and it’s not the only area that’s making South America a hot target for today’s explorationists.
The Marcellus Formation of Pennsylvania represents an outstanding example of an organic matter (OM)–hosted pore system; most pores detectable by field-emission scanning electron microscopy (FE-SEM) are associated with OM instead of mineral matrix. In the two wells studied here, total organic carbon (TOC) content is a stronger control on OM-hosted porosity than is thermal maturity. The two study wells span a maturity from late wet gas (vitrinite reflectance [Ro], 1.0%) to dry gas (Ro, 2.1%). Samples with a TOC less than 5.5 wt. % display a positive correlation between TOC and porosity, but samples with a TOC greater than 5.5 wt. % display little or no increase in porosity with a further increasing TOC. In a subset of samples (14) across a range of TOC (2.3–13.6 wt. %), the pore volume detectable by FE-SEM is a small fraction of total porosity, ranging from 2 to 32% of the helium porosity. Importantly, the FE-SEM–visible porosity in OM decreases significantly with increasing TOC, diminishing from 30% of OM volume to less than 1% of OM volume across the range of TOC. The morphology and size of OM-hosted pores also vary systematically with TOC. The interpretation of this anticorrelation between OM content and SEM-visible pores remains uncertain. Samples with the lowest OM porosity (higher TOC) may represent gas expulsion (pore collapse) that was more complete as a consequence of greater OM connectivity and framework compaction, whereas samples with higher OM porosity (lower TOC) correspond to rigid mineral frameworks that inhibited compactional expulsion of methane-filled bubbles. Alternatively, higher TOC samples may contain OM (low initial hydrogen index, relatively unreactive) that is less prone to development of FE-SEM–detectable pores. In this interpretation, OM type, controlled by sequence-stratigraphic position, is a factor in determining pore-size distribution.
The Vaca Muerta is now a leading shale play in Latin America. Check out this article on the workshop AAPG recently held in Buenos Aires.
It’s all about staying on target: Technological advances are helping to make geosteering an increasingly valuable tool for geologists involved in horizontal wells.
In January 1860, Lawrence, Kan., newspaperman George W. Brown, while visiting his hometown of Conneautville, Pa., was captured in the excitement of a new oil boom radiating from nearby Titusville.
AAPG provided a glowing introduction to me last month in this column, but now that it is time for my first column:
Production from unconventional petroleum reservoirs includes petroleum from shale, coal, tight-sand and oil-sand. These reservoirs contain enormous quantities of oil and natural gas but pose a technology challenge to both geoscientists and engineers to produce economically on a commercial scale. These reservoirs store large volumes and are widely distributed at different stratigraphic levels and basin types, offering long-term potential for energy supply. Most of these reservoirs are low permeability and porosity that need enhancement with hydraulic fracture stimulation to maximize fluid drainage. Production from these reservoirs is increasing with continued advancement in geological characterization techniques and technology for well drilling, logging, and completion with drainage enhancement. Currently, Australia, Argentina, Canada, Egypt, USA, and Venezuela are producing natural gas from low permeability reservoirs: tight-sand, shale, and coal (CBM). Canada, Russia, USA, and Venezuela are producing heavy oil from oilsand. USA is leading the development of techniques for exploring, and technology for exploiting unconventional gas resources, which can help to develop potential gas-bearing shales of Thailand. The main focus is on source-reservoir-seal shale petroleum plays. In these tight rocks petroleum resides in the micro-pores as well as adsorbed on and in the organics. Shale has very low matrix permeability (nano-darcies) and has highly layered formations with differences in vertical and horizontal properties, vertically non-homogeneous and horizontally anisotropic with complicate natural fractures. Understanding the rocks is critical in selecting fluid drainage enhancement mechanisms; rock properties such as where shale is clay or silica rich, clay types and maturation , kerogen type and maturation, permeability, porosity, and saturation. Most of these plays require horizontal development with large numbers of wells that require an understanding of formation structure, setting and reservoir character and its lateral extension. The quality of shale-gas resources depend on thickness of net pay (>100 m), adequate porosity (>2%), high reservoir pressure (ideally overpressure), high thermal maturity (>1.5% Ro), high organic richness (>2% TOC), low in clay (<50%), high in brittle minerals (quartz, carbonates, feldspars), and favourable in-situ stress. During the past decade, unconventional shale and tight-sand gas plays have become an important supply of natural gas in the US, and now in shale oil as well. As a consequence, interest to assess and explore these plays is rapidly spreading worldwide. The high production potential of shale petroleum resources has contributed to a comparably favourable outlook for increased future petroleum supplies globally. Application of 2D and 3D seismic for defining reservoirs and micro seismic for monitoring fracturing, measuring rock properties downhole (borehole imaging) and in laboratory (mineralogy, porosity, permeability), horizontal drilling (downhole GPS), and hydraulic fracture stimulation (cross-linked gel, slick-water, nitrogen or nitrogen foam) is key in improving production from these huge resources with low productivity factors.
Request a visit from Ameed Ghori!