Crude Oil Spikes More Than 3 Percent after Iran Fires Missiles at Israel - 02 October, 2024 07:30 AM
Hess Denies Oil Price Maneuvers by CEO - 02 October, 2024 07:30 AM
Colorado's Move to Ban Oil Drilling Sparks Nationwide Debate - 02 October, 2024 07:30 AM
TotalEnergies, APA Greenlight $10.5 Billion Oil and Gas Project in Suriname - 02 October, 2024 07:30 AM
Middle East Nation Offers Promising Offshore Oil and Gas Exploration Block - 02 October, 2024 07:30 AM
The origin of thermogenic natural gas in the shallow stratigraphy of northeastern Pennsylvania is associated, in part, with interbedded coal identified in numerous outcrops of the Upper Devonian Catskill and Lock Haven Formations. Historically documented and newly identified locations of Upper Devonian coal stringers are shown to be widespread, both laterally across the region and vertically throughout the stratigraphic section of the Catskill and Lock Haven Formations. Coal samples exhibited considerable gas source potential with total organic carbon as high as 44.40% by weight, with a mean of 13.66% for 23 sample locations analyzed. Upper Devonian coal is thermogenically mature; calculated vitrinite reflectances range from 1.25% to 2.89%, with most samples falling within the dry-gas window. Source potential is further supported by gas shows observed while drilling through shallow, identifiable coal horizons, which are at times located within fresh groundwater aquifers. Thermogenic gas detected in area water wells during predrill baseline sampling is determined not only to be naturally occurring, but also common in the region.
Not oil, not shale, but a huge resource! Industry interest in developing oil shale production technology rises and falls with oil prices and the availability of cheaper options. Shale oil in formations like the Bakken is currently more economically attractive and less risky. Chevron, Shell and Exxon-Mobil have ended their oil shale projects in the past year, but Red Leaf Resources is moving ahead.
The recent National Academies’ Institute of Medicine (IOM) report on its late-April 2012 workshop, “Health Impact Assessment of Shale Gas Extraction,” describes many potential health impacts of shale gas development and identifies the data gaps.
New geosteering tools are helping to drive eye-raising crude oil production levels in the Bakken shale play.
The second annual Playmaker Forum will build on the success of last year’s event, offering professional development, networking, and tricks of the trade from some of the best oil finders in the world.
Shale may be the reservoir du jour, but a wide range of conventional reservoirs still hold promise in diverse regions throughout the world.
The Tarim Basin is one of the most important hydrocabon-bearing evaporite basins in China. Four salt-bearing sequences, the Middle and Lower Cambrian, the Mississippian, the Paleogene, and the Neogene, have various thickness and areal distribution. They are important detachment layers and intensely affect the structural deformation in the basin. The Kuqa depression is a subordinate structural unit with abundant salt structures in the Tarim Basin. Salt overthrusts, salt pillows, salt anticlines, salt diapirs, and salt-withdrawal basins are predominant in the depression. Contraction that resulted from orogeny played a key function on the formation of salt structures. Growth strata reveal that intense salt structural deformation in the Kuqa depression occurred during the Himalayan movement from Oligocene to Holocene, with early structural deformation in the north and late deformation in the south. Growth sequences also record at least two phases of salt tectonism. In the Yingmaili, Tahe, and Tazhong areas, low-amplitude salt pillows are the most common salt structures, and these structures are commonly accompanied by thrust faults. The faulting and uplifting of basement blocks controlled the location of salt structures. The differences in the geometries of salt structures in different regions show that the thickness of the salt sequences has an important influence on the development of salt-cored detachment folds and related thrust faults in the Tarim Basin. Salt sequences and salt structures in the Tarim Basin are closely linked to hydrocarbon accumulations. Oil and gas fields have been discovered in the subsalt, intrasalt, and suprasalt strata. Salt deformation has created numerous potential traps, and salt sequences have provided a good seal for the preservation of hydrocarbon accumulations. Large- and small-scale faults related with salt structures have also given favorable migration pathways for oil and gas. When interpreting seismic profiles, special attention needs to be paid to the clastic and carbonate interbeds within the salt sequences because they may lead to incorrect structural interpretation. In the Tarim Basin, the subsalt anticlinal traps are good targets for hydrocarbon exploration.
In prospective basins affected by exhumation, uncertainty commonly exists regarding the maximum burial depths of source, reservoir, and seal horizons. One such basin is the Otway Basin, an important gas province in southeastern Australia, which has witnessed several exhumation events. Here, we present estimates of net exhumation magnitudes for 110 onshore and offshore petroleum wells based on the sonic transit time analyses of Lower Cretaceous fluvial shales. Our results show significant post-Albian net exhumation in the eastern onshore Otway Basin (1500 m [4920 ft]) and a generally minor net exhumation (200 m [655 ft]) elsewhere in the Otway Basin, consistent with estimates based on thermal history data. The distribution of net exhumation magnitudes in relation to mid-Cretaceous and Neogene compressional structures indicates that exhumation was dominantly controlled by short-wavelength basin inversion driven by plate-boundary forces. Deeper burial coupled with high geothermal gradients in the onshore eastern Otway Basin and along the northern basin margin during the early Cretaceous have rendered Lower Cretaceous source rocks mostly overmature, with any remaining hydrocarbons from the initial charge likely to be trapped in tightly compacted reservoirs and/or secondary (fracture-related) porosity. However, the embrittlement of these reservoirs during their deeper burial may present opportunities for the development of low-permeability plays through hydraulic fracturing where smectite clay minerals are illitized. Source rocks at near-maximum burial at present day are at temperatures suitable for gas generation, with key controls on prospectivity in these areas including the sealing potential of faulted traps and the relationship between charge and trap development.
It’s now been shown that the “sweet” aspect of an identified sweet spot can change – not only stratigraphically, but also laterally within the zone itself.
Edinburgh, Scotland, has a new research center planning to open its doors in 2015. It is the Sir Charles Lyell Centre, named after Britain's 19th century geologist. The uptick of interest in emerging industries of shale oil and gas and deep sea metal mining is just one of the areas of the focus planned for the centre.
Production from unconventional petroleum reservoirs includes petroleum from shale, coal, tight-sand and oil-sand. These reservoirs contain enormous quantities of oil and natural gas but pose a technology challenge to both geoscientists and engineers to produce economically on a commercial scale. These reservoirs store large volumes and are widely distributed at different stratigraphic levels and basin types, offering long-term potential for energy supply. Most of these reservoirs are low permeability and porosity that need enhancement with hydraulic fracture stimulation to maximize fluid drainage. Production from these reservoirs is increasing with continued advancement in geological characterization techniques and technology for well drilling, logging, and completion with drainage enhancement. Currently, Australia, Argentina, Canada, Egypt, USA, and Venezuela are producing natural gas from low permeability reservoirs: tight-sand, shale, and coal (CBM). Canada, Russia, USA, and Venezuela are producing heavy oil from oilsand. USA is leading the development of techniques for exploring, and technology for exploiting unconventional gas resources, which can help to develop potential gas-bearing shales of Thailand. The main focus is on source-reservoir-seal shale petroleum plays. In these tight rocks petroleum resides in the micro-pores as well as adsorbed on and in the organics. Shale has very low matrix permeability (nano-darcies) and has highly layered formations with differences in vertical and horizontal properties, vertically non-homogeneous and horizontally anisotropic with complicate natural fractures. Understanding the rocks is critical in selecting fluid drainage enhancement mechanisms; rock properties such as where shale is clay or silica rich, clay types and maturation , kerogen type and maturation, permeability, porosity, and saturation. Most of these plays require horizontal development with large numbers of wells that require an understanding of formation structure, setting and reservoir character and its lateral extension. The quality of shale-gas resources depend on thickness of net pay (>100 m), adequate porosity (>2%), high reservoir pressure (ideally overpressure), high thermal maturity (>1.5% Ro), high organic richness (>2% TOC), low in clay (<50%), high in brittle minerals (quartz, carbonates, feldspars), and favourable in-situ stress. During the past decade, unconventional shale and tight-sand gas plays have become an important supply of natural gas in the US, and now in shale oil as well. As a consequence, interest to assess and explore these plays is rapidly spreading worldwide. The high production potential of shale petroleum resources has contributed to a comparably favourable outlook for increased future petroleum supplies globally. Application of 2D and 3D seismic for defining reservoirs and micro seismic for monitoring fracturing, measuring rock properties downhole (borehole imaging) and in laboratory (mineralogy, porosity, permeability), horizontal drilling (downhole GPS), and hydraulic fracture stimulation (cross-linked gel, slick-water, nitrogen or nitrogen foam) is key in improving production from these huge resources with low productivity factors.
Request a visit from Ameed Ghori!