Home

Evaporites

Bulletin Article

Evolution of shelf-margin clinoforms and deep-water fans during the middle Eocene in the Sorvestsnaget Basin, southwest Barents Sea

Interpretation of seismic data from the Sorvestsnaget Basin, southwest Barents Sea, demonstrates gradual middle Eocene basin infilling (from the north) generated by southward-prograding shelf-margin clinoforms. The basin experienced continued accommodation development during the middle Eocene because of differential subsidence caused by the onset of early Eocene sea-floor spreading in the Norwegian-Greenland Sea, faulting, salt movement, and different tectonic activity between the Sorvestsnaget Basin and Veslemoy high. During this time, the margin shows transformation from an initially high-relief margin to a progradation in the final stage. The early stage of progradation is characterized by the establishment of generally oblique clinoform shifts creating a flat shelf-edge trajectory that implies a gentle falling or stable relative sea level and low accommodation-to-sediment supply ratio (1) in the topsets. During the early stage of basin development, the high-relief margin, narrow shelf, stable or falling relative sea level, seismicity, and presumably high sedimentation rate caused accumulation of thick and areally extensive deep-water fans. Seismic-scale sandstone injections deform the fans. A fully prograding margin developed when the shelf-to-basin profile lowered, apparently because of increased subsidence of the northern part. This stage of the basin development is generally characterized by the presence of sigmoid clinoform shifts creating an ascending shelf-edge trajectory that is implying steady or rising relative sea level with an accommodation-to-sediment supply ratio of greater than 1, implying sand accumulation on the shelf. This study suggests that some volume of sand was transported into the deep water during relative sea level rise considering the narrow shelf and inferred high rates of sediment supply.

Added on 28 February, 2014

Bulletin Article

Sequence stratigraphy and depositional environments of the Shamokin (Union Springs) Member, Marcellus Formation, and associated strata in the middle Appalachian Basin

Organic-carbon–rich shales of the lower Marcellus Formation were deposited at the toe and basinward of a prograding clinothem associated with a Mahantango Formation delta complex centered near Harrisburg, Pennsylvania. Distribution of these organic-carbon–rich shales was influenced by shifts in the delta complex driven by changes in rates of accommodation creation and by a topographically high carbonate bank that formed along the Findlay-Algonquin arch during deposition of the Onondaga Formation. Specifically, we interpret the Union Springs member (Shamokin Member of the Marcellus Formation) and the Onondaga Formation as comprising a single third-order depositional sequence. The Onondaga Formation was deposited in the lowstand to transgressive systems tract, and the Union Springs member was deposited in the transgressive, highstand, and falling-stage systems tract. The regional extent of parasequences, systems tracts, and the interpreted depositional sequence suggest that base-level fluctuations were primarily caused by allogenic forcing—eustasy, climate, or regional thermal uplift or subsidence—instead of basement fault reactivation as argued by previous workers. Paleowater depths in the region of Marcellus Formation black mudrock accumulation were at least 330 ft (100 m) as estimated by differences in strata thickness between the northwestern carbonate bank and basinal facies to the southeast. Geochemical analysis indicates anoxic to euxinic bottom-water conditions. These conditions were supported by a deep, stratified basin with a lack of circulation.

Added on 28 February, 2014

Bulletin Article

Geometry, kinematics, and displacement characteristics of tear-fault systems: An example from the deep-water Niger Delta

We use three-dimensional seismic reflection data and new map-based structural restoration methods to define the displacement history and characteristics of a series of tear faults in the deep-water Niger Delta. Deformation in the deep-water Niger Delta is focused mostly within two fold-and-thrust belts that accommodate downdip shortening produced by updip extension on the continental shelf. This shortening is accommodated by a series of thrust sheets that are locally cut by strike-slip faults. Through seismic mapping and interpretation, we resolve these strike-slip faults to be tear faults that share a common detachment level with the thrust faults. Acting in conjunction, these structures have accommodated a north –south gradient in westward-directed shortening. We apply a map-based restoration technique implemented in Gocad to restore an upper stratigraphic horizon of the late Oligocene and use this analysis to calculate slip profiles along the strike-slip faults. The slip magnitudes and directions change abruptly along the lengths of the tear faults as they interact with numerous thrust sheets. The discontinuous nature of these slip profiles reflects the manner in which they have accommodated differential movement between the footwall and hanging-wall blocks of the thrust sheets. In cases for which the relationship between a strike-slip fault and multiple thrust faults is unclear, the recognition of this type of slip profile may distinguish thin-skinned tear faults from more conventional deep-seated, throughgoing strike-slip faults.

Added on 28 February, 2014

Bulletin Geologic Note

The petrophysical and petrographical properties of hyaloclastite deposits: Implications for petroleum exploration

Offshore sequences of volcaniclastic rocks (such as hyaloclastite deposits) are poorly understood in terms of their rock properties and their response to compaction and burial. As petroleum exploration targets offshore volcanic rifted margins worldwide, understanding of volcanic rock properties becomes important both in terms of drilling and how the rocks may behave as seals, reservoirs, or permeability pathways. The Hawaiian Scientific Drilling Project phase II in 2001 obtained a 3 km-(2-mi)-long core of volcanic and volcaniclastic rocks that records the emergence of the largest of the Hawaiian islands. Core recovery of 2945 m (9662 ft) resulted in an unparalleled data set of volcanic and volcaniclastic rocks. Detailed logging, optical petrology, and major element analysis of two sections at depths 1831–1870 and 2530–2597 m (6007–6135 and 8300–8520 ft) are compared to recovered petrophysical logs (gamma ray, resistivity, and P-wave velocity). This study concludes deviation in petrophysical properties does not seem to correlate to changes in grain size or clast sorting, but instead correlates with alteration type (zeolite component) and bulk mineralogy (total olivine phenocryst percentage component). These data sets are important in helping to calibrate well-log responses through hyaloclastite intervals in areas of active petroleum exploration such as the North Atlantic (e.g., Faroe-Shetland Basin, United Kingdom, and Faroe Islands, the Norwegian margin and South Atlantic margins bordering Brazil and Angola).

Added on 28 February, 2014

Bulletin E-P Note

Athabasca oil sands: Megatrap restoration and charge timing

The petroleum trap for the Athabasca oil sands has remained elusive because it was destroyed by flexural loading of the Western Canada Sedimentary Basin during the Late Cretaceous and Paleocene. The original trap extent is preserved because the oil was biodegraded to immobile bitumen as the trap was being charged during the Late Cretaceous. Using well and outcrop data, it is possible to reconstruct the Cretaceous overburden horizons beyond the limit of present-day erosion. Sequential restoration of the reconstructed horizons reveals a megatrap at the top of the Wabiskaw-McMurray reservoir in the Athabasca area at 84 Ma (late Santonian). The megatrap is a four-way anticline with dimensions 285 x 125 km (177 x 78 mi) and maximum amplitude of 60 m (197 ft). The southeastern margin of the anticline shows good conformance to the bitumen edge for 140 km (87 mi). To the northeast of the anticline, bitumen is present in a shallower trap domain in what is interpreted to be an onlap trap onto the Canadian Shield; leakage along the onlap edge is indicated by tarry bitumen outliers preserved in basement rocks farther to the northeast. Peripheral trap domains that lie below the paleospillpoint, in northern, southern, and southwestern Athabasca, and Wabasca, are interpreted to represent a late charge of oil that was trapped by bitumen already emplaced in the anticline and the northeastern onlap trap. This is consistent with kimberlite intrusions containing live bitumen, which indicate that the northern trap domain was charged not before 78 Ma. The trap restoration has been tested using bitumen-water contact well picks. The restored picks fall into groups that are consistent both with the trap domains determined from the top reservoir restoration and the conceptual charge model in which the four-way anticline was filled first, followed by the northeastern onlap trap, and then the peripheral trap domains.

Added on 28 February, 2014

Explorer Historical Highlights By Michael Morton

A Gusher at Baba Gurgur

“One man was at the head waters of the River Amazon among the headshrinkers when he was recalled to come to Iraq; another came from Argentina, another from Mexico, still another had been in Romania, one in Indo-China, several in Venezuela and the East Indies.”

Added on 01 February, 2014

Explorer Article By Jeff Ottmann,Kevin Bohacs

Conventional Reservoirs Hold Keys to the 'Un's

'Breakthrough elegance': ExxonMobil geologists Jeff Ottmann and Kevin Bohacs shared their highly-coveted knowledge on sweet spots and producibility thresholds at a recent Geosciences Technology Workshop on Unconventional Reservoir Quality.

Added on 01 February, 2014

Bulletin Article

Sequence stratigraphy of the Eocene turbidite reservoirs in Albacora field, Campos Basin, offshore Brazil

This article describes a 250-m (820-ft)-thick upper Eocene deep-water clastic succession. This succession is divided into two reservoir zones: the lower sandstone zone (LSZ) and the upper sandstone zone, separated by a package of pelitic rocks with variable thickness on the order of tens of meters. The application of sequence-stratigraphic methodology allowed the subdivision of this stratigraphic section into third-order systems tracts. The LSZ is characterized by blocky and fining-upward beds on well logs, and includes interbedded shale layers of as much as 10 m (33 ft) thick. This zone reaches a maximum thickness of 150 m (492 ft) and fills a trough at least 4 km (2 mi) wide, underlain by an erosional surface. The lower part of this zone consists of coarse- to medium-grained sandstones with good vertical pressure communication. We interpret this unit as vertically and laterally amalgamated channel-fill deposits of high-density turbidity flows accumulated during late forced regression. The sandstones in the upper part of this trough are dominantly medium to fine grained and display an overall fining-upward trend. We interpret them as laterally amalgamated channel-fill deposits of lower density turbidity flows, relative to the ones in the lower part of the LSZ, accumulated during lowstand to early transgression. The pelitic rocks that separate the two sandstone zones display variable thickness, from 35 to more than 100 m (115–>328 ft), indistinct seismic facies, and no internal markers on well logs, and consist of muddy diamictites with contorted shale rip-up clasts. This section is interpreted as cohesive debris flows and/or mass-transported slumps accumulated during late transgression. The upper sandstone zone displays a weakly defined blocky well-log signature, where the proportion of sand is higher than 80%, and a jagged well-log signature, where the sand proportion is lower than 60%. The high proportions of sand are associated with a channelized geometry that is well delineated on seismic amplitude maps. Several depositional elements are identified within this zone, including leveed channels, crevasse channels, and splays associated with turbidity flows. This package is interpreted as the product of increased terrigenous sediment supply during highstand normal regression.

Added on 31 January, 2014

Bulletin Article

Prediction of channel connectivity and fluvial style in the flood-basin successions of the Upper Permian Rangal coal measures (Queensland)

Predicting the presence and connectivity of reservoir-quality facies in otherwise mud-prone fluvial overbank successions is important because such sand bodies can potentially provide connectivity between larger neighboring sand bodies. This article addresses minor channelized fluvial elements (crevasse-splay and distributary channels) and attempts to predict the connectivity between such sand bodies in two interseam packages of the Upper Permian Rangal Coal Measures of northeastern Australia. Channel-body percent as measured in well logs was 2% in the upper (Aries-Castor) interseam and 17% in the lower (Castor-Pollux) interseam. Well spacing were too great to allow accurate correlation of channel bodies. The Ob River, Siberia, was used as a modern analog to supply planform geometric measurements of splay and distributary channels so that stochastic modeling of channel bodies was possible. The resulting models demonstrated that (1) channel-body connectivity is more uniform between minor distributary channels than between crevasse-splay channels; (2) relatively good connectivity is seen in proximal positions in splays but decreases distally from the source as channel elements diverge; and (3) connectivity tends to be greater down the axis of splays, with more isolated channel bodies occurring at the margins.

Added on 31 January, 2014

Energy Policy Blog By Edith Allison

California Offshore Fracking Controversy

January 8 the Environmental Protection Agency (EPA) issued a new rule on offshore hydraulic fracturing that takes effect on March 1. The rule adds additional effluent limits and monitoring requirements. Operators would be required to maintain an inventory of chemicals used in drilling operations and report any released into surrounding waters. The new EPA rule applies only to existing development and production platforms, and new exploratory drilling operations in federal waters off the Santa Barbara coast. There are 23 existing production platforms in California federal waters.

Added on 13 January, 2014

DL Abstract By Lesli Wood

The Shelf is a Dangerous Place: Surfing the Cretaceous Seaways

Engineering of wind farms, development of carbon sequestration projects in shelfal waters, the proliferation of communication cables that connect the world, all of these things suggest that it is time to re-examine what we know about shelf processes both updip-to-downdip and along shoreline, and the influence of shelf processes on erosion and transport of sediments.

Request a visit from Lesli Wood!

Added on 19 August, 2024

VG Abstract By Keith Gerdes

Tethyan Carbonates - Linking Tropical Seas and Crashing Plates to Some of the Largest Oil and Gas Fields in the World

The carbonate sequences that were deposited in the now exhumed Tethyan Ocean influence many aspects of our lives today, either by supplying the energy that warms our homes and the fuel that powers our cars or providing the stunning landscapes for both winter and summer vacations. They also represent some of the most intensely studied rock formations in the world and have provided geoscientists with a fascinating insight into the turbulent nature of 250 Million years of Earth’s history. By combining studies from the full range of geoscience disciplines this presentation will trace the development of these carbonate sequences from their initial formation on the margins of large ancient continental masses to their present day locations in and around the Greater Mediterranean and Near East region. The first order control on growth patterns and carbonate platform development by the regional plate-tectonic setting, underlying basin architecture and fluctuations in sea level will be illustrated. The organisms that contribute to sequence development will be revealed to be treasure troves of forensic information. Finally, these rock sequences will be shown to contain all the ingredients necessary to form and retain hydrocarbons and the manner in which major post-depositional tectonic events led to the formation of some of the largest hydrocarbon accumulations in the world will be demonstrated.

Request a visit from Keith Gerdes!

Added on 24 August, 2015

DL Abstract By Tao Sun

Integrated Reservoir Characterization and Modeling with Computational Stratigraphy

As oil and gas exploration and production occur in deeper basins and more complex geologic settings, accurate characterization and modeling of reservoirs to improve estimated ultimate recovery (EUR) prediction, optimize well placement and maximize recovery become paramount. Existing technologies for reservoir characterization and modeling have proven inadequate for delivering detailed 3D predictions of reservoir architecture, connectivity and rock quality at scales that impact subsurface flow patterns and reservoir performance. Because of the gap between the geophysical and geologic data available (seismic, well logs, cores) and the data needed to model rock heterogeneities at the reservoir scale, constraints from external analog systems are needed. Existing stratigraphic concepts and deposition models are mostly empirical and seldom provide quantitative constraints on fine-scale reservoir heterogeneity. Current reservoir modeling tools are challenged to accurately replicate complex, nonstationary, rock heterogeneity patterns that control connectivity, such as shale layers that serve as flow baffles and barriers.

Request a visit from Tao Sun!

Added on 20 July, 2022

Evaporites

Related Interests

See Also ...

STAY CONNECTED: